Eclipse 300-175 CrimPro Crimper for MC3 Solar Panel Contacts
Eclipse 300-175 CrimPro Crimper for MC3 Solar Panel Contacts Overview
CrimPro Crimper for MC3 Solar Panel Contacts
CrimPro Crimper for MC3 Solar Panel Contacts
Don’t get left in the dark next time there is a power outage or when you need a flashlight. The Sylvania LED Solar Flashlight has a built-in rechargeable battery that is charged via the solar panel in direct or indirect sunlight, which means you’ll never
MARINE COMPACT FLUORESCENT BULB – 60 watt replacement using only 13 watts. 12volt DC use only. Less heat. Long life. Saves energy.
Lunar Series Crimper for MC4 Solar Panel Contacts
Ergo-Lunar Crimper for MC3 Solar Panel Contacts
# Specifications:# Voltage 0-60 V, resolution 0.01 V. That’s a 14 cell series li-poly pack!# Current 0-100 A peak, 50 A continuous, resolution 0.01 A# Charge 0-65 Ah, resolution 0.001 Ah. That’s ~32 Amps for two hours!# Power 0-6500 W, resolution 0.1 W. That’s ~8.7 Horsepower!# Energy 0-6500 Wh, resolution 0.1 Wh. # Operates from 4.0-60 V, 0 V with optional receiver battery pack# 16 x 2 STN LCD display# Powerful, 8 MIPS micro-controller# Color: Electric blue or greenApplications:Specially designed for RC Battery Packs to help you:# Set speed control cutoff voltages and currents# Tune performance by comparing different setups of pro-peller, motor, gearing, speed control and battery# Measure a full battery charge and compare to spec when charger claims done# Check peak currents are safe for battery, speed control, motor, wiring and connectors# Predict airplane flight time based on ACTUAL conditions in your model# Check battery capacity and health and whether battery should be retired# Verify that the minimum voltage under load is within specifications# Check for wiring and connector power losses.# Measure power and energy consumption of ANY device with a rechargeable battery pack, such as# Airsoft gun battery pack# Bike lighting battery pack# E-bike and Scooter battery pack# Combine the power analyzer together with our 2.4V – 7.2V, 7.2V – 12V, 24V NiMH universal smart chargers , and with 3.6V – 14.8V Li-Ion battery charger It is perfect tool to monitor battery pack’s performanceNote: In order measure the capacity of battery pack in charging condition, the battery pack must be discharged fully before measureing. For the battery pack stored for longer time, you need 3 – 5 cycle’s charging and discharging to get full capacity.We don’t suggest you to use the meter to judge battery nominal capacity, becuase usually nomimal capacity is measured by IEC standard at 0.1C charging and discharging current.
This 15 Amp diode will work great as a blocking diode or rectifying diode. It can be used with a pedal power generator, wind turbine, or solar panel.
MorningStar SunKeeper charge controller, rated for 12 Amps at 12V. Unique design mounts directly onto the junction box of your solar panel, using the standard 1/2″ knockout port, and the wires already have fork connectors for easy hookup. Highly efficient design performs all the Pulse-Width-Modulation (PWM) at the solar panel, not back at your battery, which limits your line losses and voltage drops – and the temperature compensation is performed directly at your solar panel (or it can compensate at the battery with the optional remote temp sensor).Fully sealed with epoxy encapsulation and rated for outdoor use (-40 C to +70 C, -40 F to +158 F) UV resistant housing, rated for 100% humidity (tropicalization) Fully protected against reverse polarity, short circuit, overcurrent, lightning/transient surges, high temperature and reverse current at night (NO BLOCKING DIODES NEEDED IN SOLAR PANEL). Three stage charging that MorningStar is famous for: bulk, PWM regulation, and float. Bi-Color LED indicates solar charging, regulation, normal nighttime operation and any controller or system faults.Specifications:Model #: SK-12Vdc (voltage direct current): 12VSolar Amps: 12Abr Weight: .5 lb / .22 kgDimensions: 3.9″ x 2.0″ x .5″ / 99 x 50.8 x 12.7 mmWarranty info: 5 year warranty from manufacturer